特點及應用| Characteristics and Application
適用于各種膠帶,紙卷大卷復卷為小卷以及不良品的重繞。本機特點:可將不平整材料及不等規格產品重新整理減少不良率。復卷不同寬度,只需調整校正導輪,即可將不平整材料校正達到最平整收卷。
卷取張力采用傳感器控制,可以不同材料張力自行調整。配有計長器,自動停機設置。
技術參數:
卷繞機繞絲線速度:0-280m/min(可根據客戶要求設定)
卷筒直徑: 250mm
電源:AC380V/220V 50HZ/60HZ
電機功率:120W-370W
電機轉速:1400r/min
連接電纜:4×1.5 R.S.J.MP
卷繞筒管尺寸:內徑×外徑×長度(mm) 58×68×230(內徑和長度有不同要求可在范圍內為您定做)
往復行程:203/254
單錠面板尺寸:寬×高(mm)477×330
Applicable to all kinds of tape, rolls and rolls, rolls and rewinding of defective products.The most characteristic of this machine: it can rearrange the uneven material and other products to reduce the defective rate.The different width of the rewinding can be adjusted by adjusting the adjusting guide wheel to achieve the smoothness of the uneven material.The tension of the coil is controlled by the sensor, which can be adjusted by the tension of different materials.Equipped with meter, automatic stop setting
Technical parameters:
Winding speed:0-280m/min(Can be set according to customer requirements)
The maximum diameter of the drum:250mm
Power:AC380V/220V 50HZ/60HZ
Motor power:120W-370W
Motor speed:1400r/min
Connect the cable:4×1.5 R.S.J.MP
Winding bobbin size:Inside diameter x Outside diameter x length(mm)58X68X230(The inner diameter and length have different requirements can be customized in the range)
Reciprocating stroke:203/254mm
Single spindle size:475mm×330mm