當前位置：京科油墨(亞洲)有限公司>>絲印移印油墨>>140 產品組: 特殊油墨

140 產品組: 特殊油墨

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號140-ME100/05

品牌

廠商性質經銷商

所在地香港特別行政區

在線詢價收藏產品查看聯系電話

包裝印刷網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2017-07-13 05:30:22瀏覽次數：508次

聯系我時，請告知來自包裝印刷網

產品分類 品牌分類

  絲印移印油墨

全部產品列表

暫無信息

京科油墨(亞洲)有限公司

經營模式：經銷商

商鋪產品：35條

所在地區：廣東

聯系人：蔣安（負責人）

詢價 給他留言

產品簡介

鏡面油墨

詳細介紹

SERIE 140-ME100/05
Mirror Ink, solvent based
Series 140-ME100/05, a solvent based mirror ink, is to be printed on the reverse surface （back side） of high
glossy transparent films like PET, PC, PMMA and others. After drying a mirror-like effect is achieved. To allow
perfect orientation of the metallic particles, the drying process has to be checked individually as too slow or too
fast drying is influencing this.
Onto suited substrates the ink shows quite good abrasion and scratch resistance, even without protection
coating, which is however recommended.
Printed onto first surface （front side） of dark substrates a chrome-like metallic effect is obtained, but no mirror.
To increase tape test resistance an addition of 2-3% Hardener Series 140-ME20001/GL should be made.
The ink is press ready; if lower viscosity is required it can be diluted with Thinner Series 10-03428.
Protection inks:
As protection coatings and to increase opacity, we supply as mild inks
Overlay White 140-00/ME and
Overlay Black 140-33/ME, which are not attacking the mirror effect.
We recommend that these overlay inks are mixed with 10% Hardener Series 600-HDA, or
5% Hardener Series600-GL –the latter is offering longer pot life.
Thinning is to be done only with Thinner Series 140-017/ME, which is a composition of very mild solvents thus
preventing the mirror ink layer to be attacked and “blinded”.
Overlay inks printed accordingly are fulfilling the requirements of adhesion tests by means of scotch tape or
cross hatch （GT 0）.
Characteristics
Thinner/Cleaner : for mirror ink 5-15% Series 10-03428
: for overlay inks 10% Series 140-017/ME
Retarder : none
Hardener : for mirror ink 2-3% Hardener Series 140-20001/GL
: for overlay inks 10% Hardener 600-HDA or 5% Hardener 600-GL
Mesh : NEW mesh: PET 1500, 140-31 – 150-31 Y PW, only to be used for mirror ink
Squeegee : NEW 70 Shore A, only to be used for mirror ink
Drying : forced air drying at 40°Cels.
Exposure : Only indoor use/ Outdoor use has to be checked very carefully
Hints and tips : avoid impurities like silicone or fingerprints
: Stir very well prior use
Availability : Ex stock
Packaging : 200g/1kg/5kg/20kg