No rotor curing
No rotor curing rubber, no rotor curing, curing test machine without rotor, professional production of vulcanization tester - Baer
Model: BE-2000E
A brief introduction and overview.
No rotor vulkameter is rubber material quality control of rubber processing industry, instrument most widely rapidtest and rubber based application, provide accurate data for the rubber optimization formula, parameters can accuray detect the scorch time, curing time, curing index and maximum, minimum torque.
No rotor curing including: host computer, temperature measurement, temperature control, data acquisition,processing, sensor and electric chain components. The measure, temperature control circuit consists of a control module, platinum resistance, heater, can automatically follow the power grid and environment temperature,automatic correction of PID parameters, to achieve rapid,precise temperature control purposes. Data acquisition system and electrical chain to complete automatic detection,torque signal on the vulcanization process of rubberautomatic real time display temperature value and the set value. After the end of sulfide, print vulcanization curve andparameters for automatic processing, automatic calculation.Display the curing time, curing torque. The computerdisplay the vulcanization process changes, see"temperature" and "time - torque change" process from above can stick out a mile.
Technical indicators two:
No rotor vulkameter executive standard: ASTMD5289-95ISO6502-1999 （E） GB/T16584-1996
Three. Technical parameters
Measuring range: 1 room temperature --200 ℃;
Accuracy: 2 ≤ ± 0.1 ℃ （100--200 ℃）;
3 temperature control stability: ≤ ± 0.1 ℃ （100--200 ℃）;
4 setting range: 0--200 ℃, set the minimum unit: 0.1 ℃;
5 temperature display range: 0--200 ℃ display resolution:0.1 ℃;
The 6 set time range: 0--200 minutes; set the minimum unit:1 minutes;
7 vibration frequency: 100 times / min （about 1.7HZ）;
8 vibration angle: ± 0.5 °
9 automatic range switching: increased automaticallyaccording to the actual moment;
10 power: 50HZ, 220V ± 10%, 50 ± 1Hz, must have good grounding;
11 compressed air: 0.32Mpa by the pneumatic control valvecontrol;
12 the environment temperature: ambient temperature --40℃, relative humidity is less than 80%, corrosive gas free ofair;
13 weight: About 250kg
14 Power: 2KW;
The 15 type size: 680 x 630 x 1100 （mm）;
Because we are professional, so trustworthy! Welcome to the new and old customers to browse the webpage or call the advisory!
QQ:2568841715
