| 型號 Model | Unit | KST-30 | KST-50 | KST-80 |
| 射出單元 | 螺桿直徑 Screw Diameter | mm | 18 | 20 | 22 | 20 | 22 | 25 | 26 | 30 | 35 |
| 理論射出容積 Theoretic injection c apacity | cm3 | 25 | 31 | 38 | 31 | 38 | 49 | 66 | 88 | 120 |
射出量 Injection Weight(ps) | g | 24 | 29 | 35 | 29 | 35 | 45 | 61 | 85 | 111 |
| oz | 0.8 | 1.0 | 1.2 | 1.0 | 1.2 | 1.3 | 2.2 | 2.9 | 3.9 |
| 射出壓力Injection Pressure | Kg/cm2 | 2551 | 2066 | 1708 | 3198 | 2643 | 2047 | 3236 | 2431 | 1786 |
| 射出速度Injection pressure | Ⅰ | mm/s | 197 | 214 | 160 |
| 射出率Injection Rate | cm3/sec | 50 | 62 | 75 | 67 | 81 | 105 | 85 | 113 | 154 |
| 熔膠量Plasticizing Capacity (PS) | kg/hr | 9 | 12 | 16 | 13 | 17 | 25 | 26 | 37 | 58 |
| 螺桿轉速Screw Speed | rpm | 177 | 190 | 188 |
| 電機馬達Pump Motor Power | HP(KW) | 10(7.46) | 15(11.2) | 20(14.92) |
| 射出速度Injection pressure | Ⅱ | mm/s | 283 | 265 | 197 |
| 射出率Injection Rate | cm3/sec | 72 | 89 | 108 | 83 | 101 | 130 | 105 | 139 | 189 |
| 熔膠量Plasticizing Capacity (PS) | kg/hr | 11 | 15 | 19 | 14 | 18 | 26 | 27 | 41 | 66 |
| 螺桿轉速Screw Speed | rpm | 253 | 235 | 232 |
| 電機馬達Pump Motor Power | HP(KW) | 15(11.2) | 20(14.92) | 25(18.62) |
| 夾模單元 | 閉模力 Clamping Force | Tons | 30 | 50 | 80 |
| 夾模行程 Toggle Stroke | mm | 350 | 410 | 510 |
| 模厚 Mold Height | mm | 80-430 | 140-550 | 150-660 |
| 大柱內距Space Between Tie Bars | mm | 280*280 | 310*310 | 410*410 |
| 托模行程Ejecting stroke | mm | 80 | 80 | 110 |
| 電氣單元及其它 | 溫度控制器Temperature Controller | (raneg) set | (0-400℃)*3 | (0-400℃)*4 | (0-400℃)*4 |
| 電熱容量 Barrel Heating Power | kw | 5.57 | 7.1 | 9.9 |
| 機器外型尺寸Machine Dimensions(L×W×H) | m | 4550*1250*1600 | 5050*1400*1750 | 5455*1380*1802 |
| 機器重量 Machine Weight | Tons | 3.5 | 4.5 | 5.5 |
| 系統壓力Highest System Pressure | Kg/cm2 | 145 | 170 | 170 |
注:以上射出量按聚笨乙烯比重1.05計算。因產品不斷研究改良，設計變更時，恕不另作通知。 |
