詳情介紹:PFCL201CE 50kN 稱重傳感器 測壓元件
這些單位是專為帶鋼張力測量在應用中，它是必要的或有利的，以確定垂直力分量。
由一整塊不銹鋼加工而成，它們對過載，沖擊和沖擊具有的耐受性，此外還具有對灰塵和腐蝕的高免疫力。
標準結構是高耐蝕不銹鋼，內部組件是密封的。工廠任務版本可用于異常惡劣的環境，即鍍鋅或酸洗線。
測壓元件安裝在滾動軸承下，測量與安裝面成直角的力。
來自帶鋼的反作用力與帶鋼張力成正比，通過輥子和軸承傳遞給測壓元件。
測壓元件通過接線盒連接到控制單元?？刂茊卧獙y壓元件信號轉換成與反作用力成比例的直流電壓。根據所選擇的控制單元，可以有兩個單獨的稱重傳感器(A和B)的模擬信號，稱重傳感器信號的總和(A+B)，和/或稱重傳感器信號之間的差(A-B)。
1.4.3測量原理
稱重傳感器只測量FR方向上的力。測量力可以是正的，也可以是負的。稱重傳感器通常安裝在滾動軸承下。當有一條帶材在軋輥上受張力時，張力(T)產生兩個力分量，一個在測壓元件的測量方向(FR)上，另一個在直角方向(FV)上。
測量力取決于張力(T)與測量輥周圍的帶材形成的纏繞角之間的關系。
PFCL201CE
These units are designed for strip tension measurement in applications where it is essential or advantageous to determine the vertical force component.
Machined from a single block of stainless steel, they have exceptionally high tolerance for overloads, shock and impact, in addition to high immunity to dust and corrosion.
The standard construction is of high resistant stainless steel with potted internal components. Mill-duty versions are available for exceptionally hostile environments in i.e. galvanizing or pickling lines.
The reactive force from the strip, which is proportional to the strip tension, is transferred to the load cells via the roll and the bearings.
The load cells are connected to the control unit via a junction box. The control unit converts the load cell signals to DC voltages that are proportional to the reaction force. Depending on which control unit is chosen, it is possible to have the analog signals for the two individual load cells (A and B), the sum of the load cell signals (A+B), and/or the difference between the load cell signals (A-B).
1.4.3 Principle of Measurement
The load cell only measures force in the direction FR. The measurement force may be positive or negative. The load cell is normally installed under the roll bearings. When there is a strip in tension over the roll, the tension (T) gives rise to two force components, one in the direction of measurement of the load cell (FR) and one at right angles (FV ).
The measuring force depends on the relationship between the tension (T) and the wrap angle formed by the strip around the measuring roll.
熱賣型號:PFCL201CE 50kN 稱重傳感器 測壓元件
ac -5595-008光釬焊反射開關ge d201466美卓RT節點PC AP31 D200137個性模塊
IOP371分布式單元metso 85uvf1a – 1qd Fireye集成火焰掃描儀與內部火焰繼電器
1326AB-B420E-21艾倫布拉德利伺服電機516tx 336A4940DNP516TX GE A微處理器器件
1394C-SJT10-A伺服控制器Allen bradley 516tx – 336a4940dnp516tx GE微控制器
GDlUNS0881V2印刷電路板abb 2mlr – cput霍尼韋爾CPUHT總線功能
33VM52-000-29 VM系列中的低慣量PMDC伺服電機PACIFIC scientific 177313-01-01 BENTLY NEVATA振動監測模塊
KJ2231X1-EC1 4- 20ma系列2卡emerson pxie -6556 NI自動工業控制模塊
85IRF1-1 Fireye集成火焰掃描儀與內部火焰繼電器pfcl201ce ABB壓力傳感器控制器
3300 XL 8毫米接近傳感器系統mtl BPHM64伊頓安全柵格底板
3300 XL 8毫米接近傳感器系統1794- if4ixt艾倫布拉德利Flex I/O 1794系列輸入模塊
Bently內華達州990振動變送器1734- im4 Allen Bradley POINT I/O 4點數字輸入模塊
IS200TRLYS1BGG終端中繼卡ge 1769-ECR艾倫布拉德利右端蓋(ECR)模塊一起使用
KJ2231X1-EA1 4- 20ma系列2卡emerson 136188-02 Bently Nevada以太網/RS232 Modbus I/O模塊
接近探頭Bently nevada ai02j ABB模擬輸入模塊
max4/11/03 /032/99/1/1/00伺服電機elau dssa165 ABB交流電源模塊
近距離探頭Bently nevada pxie -1073 NI PXI底盤
D201139L美卓RT節點PC AP31 D200137個性模塊f860 – ca霍尼韋爾C系列“現場總線接口模塊"
D201376美卓RT節點PC AP31 D200137個性模塊dssa165 ABB交流電源模塊
IS220PRTDH1A 336A4940CSP6 RTD (Resistance Temperature Device)輸入模塊ge 125840-02 Bently電源模塊
IS220PSCAH1A 336A4940CSP9 Mark VI組件ge 125680-01 bent位移檢測模塊
IS220PDIAH1BE 336A5026ADP4電阻溫度器件(RTD)輸入模塊ge 147663-01 BENTLY通信模擬輸出模塊
IS420ESWBH3AX GE模擬I/O模塊125800-01 Bently Nevada關鍵相輸入/輸出模塊
516TX 336A4940DNP516TX GE 516TX- a工業以太網交換機140471-01 Bently Nevada開發的帶有內部終端的I/O模塊
本篇文章出自廈門雄霸電子商務有限公司漳州分公司,轉載請附上此鏈接： /
雄霸
