LR 1000 control complete package
套裝包含：
LR 1000 control Package
RC 2 basic
labworldsoft®軟件 免費
H.PUR.8.R (2x) 免費
LR 1000.70 Lid Holder 免費
The LR 1000 control is a cost efficient, modular laboratory reactor designed for optimizing chemical reaction processes as well as for mixing, dispersing and homogenization applications at the laboratory scale. The system can be adapted quickly and easily for a wide range of applications and specific requirements. The reactor is especially designed for the unique applications requirements that define the cosmetic and pharmaceutical industries. The temperature of the medium can be as high as 120 oC. The temperature of the heating source, which is located at the bottom of the vessel, is controlled accordingly to reach the set temperature inside the medium. A PT 100.30 temperature sensor and the corresponding receptacle LR 1000.61 for the lid are included with this package. Prominent features of the LR 1000 control system are the integrated pH sensor connection and the display interface. The latter allows for the display of all process-relevant data onto a PC, save data storage and control of the reactor. The software (accessory) allows for further adaptation of the overall system and processes.
Metals in contact with medium: stainless steel ( ALSI 316 L), FFKM, PTFE, PEEK, borosilicate glass 3.3
Large easy to read TFT display for better image quality and easy navigation
Integrated weighing funktion
Torque trend measurement indicates changes in product viscosity
Integrated pH sensor connection
RS 232 and USB interface to operate the unit with the laboratory software labworldsoft
Standard joint fittings on the lid: 2 x NS 29, 2x NS 14, 2 x GL 14 for flexible adaptation of further equipment
Expandable for use with the ULTRA- TURRAX® T 25 digital (Accessory)
Vacuum valve included with delivery
Anchor stirrer with PTFE-scrapers
Connections to attach a cooling source to the back of the unit
Manual adjustable safety circuit
Integrated safety shutdown when vessel or lid is removed from the base
技術參數
| 使用容積 | 1000 ml |
| 帶分散刀具的最小樣品處理量 | 300 ml |
| 不帶分散刀具的最小樣品處理量 | 500 ml |
| 工作溫度 | 120 °C |
| 可達到真空 | 25 mbar |
| 粘度 | 100000 mPas |
| 速度范圍 | 10 - 150 rpm |
| 支桿直徑(含集成固定支架) | 16 mm |
| 物料接觸部分材料 | AISI 316L, 1.4571, 硼硅鹽玻璃 3.3, PTFE, PEEK, FKM |
| 反應容器開口(件數/標準) | 2x NS 29/32, 2x NS 14/23 & 2x GL 14 |
| 允許連續運轉時間 | 100 % |
| 溫度測量精度 | 0.1 K |
| 額定轉矩 | 3 Nm |
| 加熱輸出功率 | 1000 W |
| 冷卻介質允許工作壓力 | 1 bar |
| 稱重范圍 | 2000 g |
| 稱量分辨率 | 1 g |
| 最小轉速 (可調節) | 10 rpm |
| 加熱溫度 | 180 °C |
| 可調的安全回路，溫度上限 | 225 °C |
| 可調的安全回路，溫度下限 | 47 °C |
| 可調的安全回路，溫度上限偏差 | 20 ±K |
| 可調的安全回路，溫度下限偏差 | 10 ±K |
| 冷卻介質溫度 | 3 °C |
| 加熱溫度控制精確度 | 1 ±K |
| 帶傳感器控溫精確度 | 0.2 ±K |
| 轉速偏差 | 5 ±rpm |
| 轉速顯示 | TFT |
| 加熱溫度控制 | TFT |
| 外接溫度傳感器接口 | PT 100 |
| 攪拌槳固定 | 特殊輸出軸 |
| 轉矩顯示 | 是 |
| 轉矩測量 | 趨勢 |
| 計時器 | 是 |
| 計時器顯示 | TFT |
| 轉速控制 | 1 RPM/步 |
| 冷卻方式 | 流量 |
| 溫度顯示 | 是 |
| 工作溫度傳感器 | PT 100 |
| 安全溫度傳感器 | PT1000 |
| 工作溫度顯示 | TFT |
| 安全溫度顯示 | TFT |
| 外接傳感器使用顯示 | 是 |
| 保險斷路 | 是 |
| 轉動可逆方向 | 不 |
| pH傳感器接口 | 是 |
| pH值顯示 | TFT |
| 外形尺寸 | 443 x 360 x 295 mm |
| 重量 | 16 kg |
| 允許環境溫度 | 5 - 40 °C |
| 允許相對濕度 | 80 % |
| DIN EN 60529 保護方式 | IP 21 |
| RS 232接口 | 是 |
| USB接口 | 是 |
| 模擬輸出 | 不 |
| 電壓 | 230 / 115 V |
| 頻率 | 50/60 Hz |
| 儀器輸入功率 | 1200 W |
